Learn More About a Plumbing Inspection
Your plumbing system will run into problems along the line which will arise the need for a plumbing inspection in order to pinpoint problems areas. Even if problems aren’t immediate your property will still require a plumbing inspection to be conducted every so often in order to make sure that all systems are in good condition. With a plumbing inspection, you’ll be able to catch problem areas in their beginning stages before they affect other areas and worsen. It’s important to get in touch with certified plumbers when you’re looking into a plumbing inspection so that you may have recommendations that best match with your particular property specifications. In order to learn a bit more about a plumbing inspection and what it entails, here is some general background information that may be of use to you.
What happens during a plumbing inspection?
A plumbing inspection is designed to encompass the entirety of your property’s plumbing system in order to see the complete picture of its health, immediate needs, and future projects. The entire plumbing system will involve your sinks, faucets, washer, pipes, toilets, shower, bath, water lines, sewer lines, and other appliances such as water heaters or boilers. Proper water pressure will be tested and your water heater and toilets typically will have special attention placed upon them.
What is a rough plumbing inspection?
A rough plumbing inspection is considered to involve a property where only water supply and drain pipes are running while sinks, faucets, and other fixtures are not installed as of yet.
How long does a plumbing inspection take?
A plumbing inspection will take two hours to complete on average but the amount of time will largely depend on the size of your property and the number of problems discovered.
How often should you check your plumbing?
A plumbing inspection should be conducted by a professional at least once every two years while some recommend every year.
How do I know if my plumbing is bad?
A plumbing inspection will be the best indicator to professionally measure if there is something wrong with your plumbing. There are some signs, however, where you may be able to tell that repairs need to be made. If you constantly are getting low water pressure around the house this could point to problems with your pipes. If you see stains on your walls then there could be that there is a leak present in the pipes behind them. With unpleasant smells coming from the drain, there could be pipe corrosion, water tank sediment, or leaks with your sewer line. What’s more, discolored water will point towards corrosion, rust or sediment buildup. Lastly, hearing odd sounds with your pipe can indicate high water pressures, loosened pipe connections, a bad water heater, leaks, and other possibilities.
What are the most common plumbing problems?
- Dripping faucets.
- Slow draining sink.
- Clogged bath or shower drain.
- Clogged toilet.
- Running toilet.
- Faulty water heater.
- Low water pressure.
- Jammed garbage disposal.
- Leaky pipes.
- Sewer system backup.
Can bad plumbing make you sick?
Bad plumbing does have the ability to make you sick as you could be exposed to Salmonella, Hepatitis, or E.Coli from everyday tasks such as washing your hands to showering. It’s important to have a water quality test conducted for your property in case the issue is the quality of the water you get from your city. With this, you may be able to implement a whole house water purification system for a healthier water output. If it isn’t that, a plumbing inspection should be conducted to see if piping materials or your water heater are worn, rusting, or causing unnatural build up.
How much does it cost to run a camera down a sewer line?
A video camera plumbing inspection will incorporate the use of state of the art equipment that can track and locate problem areas and will tend to be more expensive than a regular plumbing inspection. Depending on the circumstances, prices can range from a few hundred to a couple of hundred dollars. Professional plumbers will typically charge a flat rate for this service yet it depends on the company that you go with for this type of plumbing inspection service.
How do you check for water leaks in your pipes?
If you don’t have a water leak detection tool as used by professionals you may be able to conduct an amateur plumbing inspection of your property to see if there is a leak. First, make sure that there isn’t any water being used in the house. Then, locate you water meter and check to see if the leak indicator is moving. If you don’t have a leak indicator turn off your water and allow water to drain out of the house. If you hear the sound of water moving in the pipes or notice your water meter is still active then you may have a leak.
What is considered a plumbing emergency?
A plumbing emergency will consist of situations where the structure of the property is put at risk or the production or use of water is prevented. Such events like with flooding, sewer backups, burst pipes, and lack of any water can be considered to be emergency plumbing situations. A plumbing inspection should be conducted with your emergency plumbing situation as it can localize problem areas, find other problems that are adding to the issue, and back up any insurance claims that need to be made.
Get Help From a Professional Today
If you’re in need of a plumbing inspection for your property count on the services of your local plumber. A qualified plumber will be able to make sure all areas of your home are well maintained and let you know of any cases that need to be addressed. Ensure a properly working plumbing system by scheduling an appointment with your qualified, local plumbing company today.
If you’re interested in a plumbing inspection in Marietta, GA call 404-475-3009 with Plumbers 4 Real!