Category Archives: Uncategorized

What is a sump pump and how does it work?

sump pump

Why get a sump pump?

To answer the question, what is a sump pump, it is a device that is usually installed in a basement, or the lowest point possible. If there isn’t a low enough point, the sump pump installation will require a pit to be dug out for the unit. 

So, what is the purpose of a sump pump, and what is a sump pump used for? It pumps out excess water from the basement that could cause major flooding. Having sump pump installation can help thwart a build-up of water which would otherwise lead to water damage, flooding, and expensive structural damage. 

It depends on where you’re having water buildup problems. Sump pump installation is typical for homes and buildings built on a sloped property. Another reason that a sump pump installation may be needed is if the soil around your home or business is dense and water doesn’t flow away, but instead, floods under the structure or in the basement. The 4 most common reasons homeowners opt to have a sump pump installation done are: 

1. Keep the Basement or Crawlspace Dry

This is the most common reason that a sump pump installation is needed. The sump  pump fills up with excess water, and then the pump removes that water through a pipe, leading it outside. There is a float activator that tells the pump when to start pumping and a check valve installed between the pump and the pipe that keeps the water from back flowing. 

2. To Prevent Mildew and Mold 

With a sump pump installation, the basement or crawlspace is kept dry, which prevents mildew and mold, ,which are unsightly, and unhealthy. 

3. Water Level Is Reaching Height Warning

A sump pump installation does more than pump out excess water. If the sump pump isn’t working, example would be a power outage, t will alert the homeowner that imminent flooding is possible. if the basement or crawlspace is in danger of being flooded. This allows the homeowner a warning to call their plumber before a catastrophe happens. 

4. A Value Add 

A sump pump installation in proper working order will make a home attractive for a potential buyer. It could raise your property value as well if the area is known for having sump pump installations. It gives a potential buyer the knowledge the current owner has kept the basement dry, and the structure is sound. 

5. Soil Stabilized

For a commercial structure, a sump pump installation will stabilize the soil and that keeps the building stable. 

How long do sump pumps last on average?

There isn’t any appliance or equipment within your home that will last forever, and that includes the sump pump. On the average, after your sump pump installation, approximately around 10 years later, you may not notice that your sump pump has any malfunction … until it isn’t functioning at all. 

Once it quits, the water damage starts and everything in the area of the sump pump gets damaged. There are several factors that can impact the life of your sump pump. By knowing what signs are telling you that it is about to quit, you can save yourself some headache and a lot of money: 

  • The pump doesn’t engage. This could be cause the pump is clogged with debris and dirt, the float could be jammed or have an obstruction, all which could be caused by a loose-fitting lid.  
  • The age of the sump pump. If your sump pump installation was 7 years ago or more, it probably needs to be replaced. 
  • Visible rust around the base. When you notice corrosion and rust around the float or motor, that is from bacteria and chemical build-up, which it taking a toll on the sump pump system. 
  • The pump seldom turns on. If your sump pumps isn’t engaging regularly, it will shorten it’s lifespan. Keep a journal on your sump pumps operation times and maintenance performed. On a regular basis, give your sump pump a test run just to keep it moving. 
  • The pump runs continually. When a sump pump that is getting close to its end of life will often run non-stop because the float is the on/off switch and will begin to be mis-calibrated. 

Do sump pumps smell?

Yes, a sump pump will have an odor, it basically is part of the job. However, a  strong pungent odor could be an indication you to have it services. 

sump pump

Do sump pumps need maintenance?

Always consult the owner’s manual after your sump pump installation, and periodically afterward, for the manufacturer’s instructions. Here you’ll find their recommended standard maintenance and service schedule. The following maintenance is industry recommendation on frequency of sump pump maintenance:

  • Monthly: A monthly cleaning of the inlet opening, and screen should be one monthly, after you’ve unplugged it. 
  • Annually: Remove the sump pump once a year, clean the pump and the pit. Schedule a professional inspection, preferably by the same company that did your sump pump installation. 

When you buy a house, you’re making a big investment. So, if you are looking at houses with a sump pump, are houses with sump pumps bad investment? Absolutely not!  If anything, you can consider that a small insurance policy against flood damage. 

Over  60% of all houses in this country experience some type  flooding or moisture buildup  issue. A house with a sump pump installation will save you from that grief. You should certainly ask about the sump pump, like why was it installed and how long ago. Ask to see the sump pump record of run times and maintenance. One thing for sure having a sump pump installation already will far outweigh any negativity about the sump pump! Need sump pump installation in Marietta, GA? Call 404-475-3009 today!

What Does Low Water Pressure Mean?

water line burst

What is the main water line?

Taking a shower or washing dishes with low water pressure is aggravating, but what can you do about it? Well, the first thing you want to do is check the plumbing in, around, and under your house. There could be a leak somewhere that needs water line repair. If you don’t find anything there, it could be the main water line. 

Every homeowner will likely experience a main water line problem sometime. It may be something a handy DIY homeowner can fix, or it may require a professional plumber’s knowledge and service of water line repair. Either way, this is a vital part of your home because this pipe is how the water gets inside your home for bathing, cooking, and more. 

The main water line is located underground and is the connection from the community water source to your home. This is not the same line as the private sewer lateral line that takes away your used water and sewage. The main water line is for clean water coming into your home and until you have water line repair done, the water pressure inside your home will remain low. . 

How do water main breaks happen?

Main water line pipes are under pressure, so when the break, crack, or develop a hole, some of the water goes into the soil and surfaces instead of through the pipes inside your home. Cracks and holes often develop in a main water line from  any of the following: 

The Temperature

  • Slight changes in the temperature of the air or water can cause stress on water pipes.
  • Cold temperatures will freeze water pipes, making them brittle.
  • Water pipes are stressed externally when the ground freezes, causing them to break.
  • Water temperature is delayed behind the air temperature changes. Water line breaks are common up to 2 days later. 

The Pipe’s Age

  • As water pipes age, the breaking rate increases. There are water lines still in place and being used from the late 1800s in many cities around the country! 

The Material

  • Water line pipes that were installed in the 1970s or before were made of materials that become brittle with time, making them susceptible to breaking, cracking, and having holes develop.

Why fix main water line breaks?

Fixing main water line is important for your family’s safety. With the main water line busted, it is vulnerable to contamination getting in the water line. That contaminated water is coming into your home where you’re bathing, cooking with it, and drinking that water. Water line repairs are an absolute must as soon as you realize you have a main water line leak and the use of any water for cooking and drinking should stop until the water line repair is complete.        

How do you fix a water main break?

Learning the How to main water line repair isn’t easy, but it is repairable. With the following steps: 

  • Step One: Identify the spot, which if water is blowing out like a geyser, that’ll be easy. If you aren’t seeing any obvious main water line breaks but your water bill has had a dramatic increase, you’ll have to do some searching. Look for really green patches in the grass or after a good rain, areas that puddle and stay wet after all else has dried. 
  • Step Two: Turn the water off at the main water valve or you may have to require the city to turn it off. This is usually at the water meter and requires a unique tool. 
  • Step Three: Dig a trench in the area where the water is leaking deep  enough to uncover the pipe and far enough on both sides of the leak where you can work. 
  • Step Four: Check the water line for wear in areas other than the obvious leak. Looking for tree roots that need to be cut back or redirected so they don’t cause further damage to water lines.  Look for other areas of pipe that look like they are on the verge of breaking or cracking and repair them as you do the other water line repairs. 
  • Step Five: Cut out the leaking pipes, six inches to either side and replace with rigid copper piping. Clean the ends of the existing pipe and the new pipe. 
  • Step Six: With a wire brush, clean the interior or two clip couplings then slide the couplings on the new water line pipe to the center of the pipe.  Position the new water line pipe in place underground and slide the slip couplings half on old and half on new pipe. 
  • Step Seven: Using a propane torch, heat the couplings from the underneath side to connect the couplings to the old pipe. Using a tar base insulator, spread over the new section to weatherproof the water pipe. 

How long does it take to fix a main water line?

A main water line repair can take up to eight hours on average. Some can take less time and some can take more time. It depends on where the break is and how much line needs to be replaced.  When one part is repaired and the water is turned back on, it can cause a weak spot to break, then that area need water line repair. 

low water pressure

Can you shower if there is a water main break?

A normal water main break can be repaired while the water is still on, placing the line under pressure and will not require the water to be boiled before using. This means you can bathe, do laundry, and water plants without having to boil the water. Until the main water line repair is completed though, you should boil any water that will be used for cooking, washing dishes, or drinking. 

Does home insurance cover water line breaks? Yes, as a homeowner, you pay a monthly premium for your homeowners insurance policy and you’d like to get something back in return. When it comes to water line repairs, all you’ll get is help with cleaning up any damage that was done by a sudden water line break.  

If the water line repair is because the pipe was old and nothing was significantly damaged, no, your insurance will probably not pay for the repair.  You should check your policy and clarify this you’re your agent. Need help with water line repair in Marietta, GA? Call 404-475-3009 today.

What is backflow testing for?

cleaning sewage

Testing your system

The word ‘backflow’ sounds simple and understated but is a serious health hazard to humans. Backflow is when unwanted water, usually wastewater, flows in an opposite direction, contaminating potable water with wastewater. To assure this isn’t happening, cities and communities perform backflow testing

That unwanted backflow water can contain dirty water from dishwashers, showers, sinks, and human waste. It can be filled with fertilizer, pesticides, and swimming pool chlorine. Think of everything you use water to rinse and wash off is what backflow contains. Not only is this a health issue, but it is also harmful to the pipes, causing them to corrode and leak.  With backflow testing, you can be assured there isn’t any backflow, or if there is, then you know to bring in a professional plumber. 

Having a safety device installed that prevent backflow  is available and helpful in case of any dramatic or unexpected change in water pressure. This backflow prevention device stops contaminated water from entering your clean water supply. If this device isn’t professionally installed and regularly tested, it allows contaminated water to enter the businesses and homes, creating health hazards. 

What causes backflow?

Backflow is caused by cross-connections within a plumbing system that may allow contaminants into the clean drinking water system. This occurs when the pressure in a tank is lower than the water system pressure, allowing the  contaminated water into the clean water system. 

Backflow also occurs when back pressure is created by higher water pressure used  in a fire protection system forces contaminated water  into the public clean water system. Backflow testing detects these possible contaminations happening so that they can be corrected before the contaminated water has the chance of harming any humans.

Is backflow testing necessary?

Our drinking water comes from underground by pressurized pipes that direct the water in one direction.  A cross connection safeguards that potable water is separated from non-potable water so that we have  clean, fresh water. Backflow testing is necessary to make sure there isn’t any water flowing the wrong direction. When water is allowed to run backwards, which can happen because of several things, our drinking water is contaminated and unsafe for consumption. 

Backflow testing is required by every business and multi-unit residential settings at the cross-connection point annually. This is done by a backflow test and gauge device. If local regulations do not require it, the business or multi-unit complexes can purchase a device and perform their own backflow testing. Backflow testing is imperative for maintaining a healthy environment any place that water is consumed or used for drinking. 

How often is backflow testing required?

In the state of Georgia, backflow testing equipment is required to adhere to the following: 

  • RPZ (Reduced Pressure Zone) assembly is required to be tested annually and the assembly to be rebuilt every five years. 
  • DCV (Double Check Valve) assembly is required to be tested every three years.

Does every house have a backflow preventer?

This is dictated by every local or state regulations.  Today, plumbing fixtures, backflow protection is typically built-in during manufacturing.  One example is a faucet spout is designed to terminate above a sink or tub’s flood rim level. In this manner, when a sink or tub has reached its flood level of contaminated water, like backed-up sewage, an air gap is created at the elevated spout, preventing it from backflowing. Every water using device in the home has a form of backflow prevention, including the dishwashers, refrigerator/ice makers, washing machines. Some appliance brands employ a built-in air gap for a backflow prevention method. 

septic system

How long does a backflow test take?

Once a professional plumber arrives, equipped with everything need to perform backflow testing and repairs, they will connect the backflow gauges to the backflow device. The water is turned off for approximately twenty minutes. Each device in the business or home is then tested, and if needed, repairs are completed at that time. Once all the backflow testing is completed and repairs are made, the water is turned on. 

Even landscaping drainage and water should have backflow testing each spring.  Before you hire a plumbing company or contractor to perform backflow testing, make certain the are trained and certified to perform backflow testing for irrigation systems.  Not all plumbing companies and contractors00 are trained and certified to perform backflow testing and repair backflow devices. 

As with any contractor work, you should ask to see their certification, licenses, and insurance as well as recent references. Your due diligence in checking the recent references could be the difference in a job well done and job you thought to be done and wasn’t.  Any error in backflow testing and repair could be the difference in your business or home being a healthy and safe place. Call 404-475-3009 today for your backflow testing in Marietta, GA.

How do I fix my toilet?

toilet in bathroom

What are the parts called inside a toilet?

 The “throne” as it is often referred to, is one fixture in a home that we depend on to always be there and in working order. Unfortunately,  like other things we come to depend on, toilets break, and toilet repair becomes necessary. With a toilet, there are many components within them that can be the problem.

A toilet basically has several moving parts, and those moving parts will break or wear out from use. Toilet repair doesn’t always require the services of a professional plumber if you learn the various parts in the tank and how it all works.

Take the time now to learn your toilet as we describe the various parts inside the tank so you’ll be better prepared for toilet repair. Placing the tank lid to the side, we’re going to describe a standard flush toilet that is found in most homes:  

  • The Handle and Flush Rod: The handle is the part you use to flush the toilet. The flush rod is attached to the flush rod which has a chain attached to it.
  • The Lift Chain: Extended from the handle horizontally is the lift rod which has a chain connected to it vertically descending to the tank bottom. This mechanism is what initiates the flush valve and allows the water to flush down through the toilet bowl. A toilet repair chain is usually shortening the chain or replacing the chain is one of the most common of toilet repairs.
  • The Flapper: There is a rubber flapper connected to the lift chain that is against the flush valve. When the handle is pressed down, the chain pulls the flapper up and the water inside the tank empties out.
  • The Flush Valve: At the tank bottom is a metal or plastic part that forms an opening that the water drops from when leaving the tank when the flush has begun. The flush valve and the vertical are usually connected to the overflow tube in a one-piece construction with a large O-ring seal fitting around the flush valve below the tank, often referred to the tailpiece.
  • The Overflow Tube: The overflow tube is attached to the flush valve, providing a safety measure that keeps the tank water from overflowing if there is a failure with the water supply valve.
  • The Shutoff Valve: On the exterior of the toilet, there is a water supply pipe that allows cold water into the toilet, located close to the floor to the left side and under the tank.
  • The Supply Tube: Coming from the shutoff valve and going to the water supply tailpiece at the toilet tank bottom is a steel mesh, plastic, or vinyl supply tube.
  • The Ballcock: Inside the tank, the ballcock, a vertical assembly, typically mounted on the tank’s left side that opens the supply of freshwater that refills the tank after the flush has completed.
  • The Float Ball: There is a floating device on all supply valves that senses when the water level inside the tank has reached the required level, then shuts the water supply off.
  • The Refill Tube: A flexible, small tube is clipped on the overflow tube at the top that has water coming from the water supply valve and refills the tank after the flush.
  • The Toilet Bowl: This is where you sit, the “throne” and it is bolted to the floor. A common toilet repair bolt to floor needs to be replaced or tightened.
  • The Wax Ring: Under the “throne” is a wax ring that creates a seal to connect the toilet to the drain, fitting to the flange. When a new wax ring is required, a toilet repair flange may be required.

What’s wrong with my toilet?

Some common toilet repairs that you may be faced with are:

A Running Toilet: A constant running toilet could be the flapper not sealing to the flush valve, allowing water to keep running. If the flapper is good order, replace the flush valve.

A Leaking Toilet: This can be one of several issues as described and should be addressed promptly to avoid waste of water and more damage. 

  • Water Supply Valve Leaking 
  • Supply Line Leaking
  • Toilet Bowl and Tank Connect Leaking
  • Toilet and Floor Connection Leaking
  • Tank Leaking at The Side

Can a toilet fill valve be repaired?

The fill valve will wear out in any toilet that is used regularly. The following are indications that you need to learn and recognize that will tell you it is toilet repair is needed by replacing the fill valve.

  • Loud Sounds: When the toilet is humming and screaming, it is typically when the ballcock metal parts wear out, not allowing the valve to open or close easily. This forces the water to flow through the hole, creating the loud sounds.  
  • Toilet Running: A flapper leaking will keep the water draining slowly and the fill valve will constantly run to fill the tank.
  • Valve Whistling: When there is a high-pitched sound coming from the ballcock valve opening, it is typically a toilet repair requiring a replacement of the ballcock.

How do you fix a weak flushing toilet?

When a toilets is used for some time, the flush can become weak. This can often be from calcium, lime, and other minerals building up inside the tank that block or restrict the water flowing, creating an incomplete flush.  Two ting that are an easy toilet repair is simply cleaning or replacing are:

  • Cleaning the feed holes and jet holes inside the toilet
  • Check the tank water level, the flapper maybe need adjusting or replaced
toilet bowl running correctly

Why did my toilet explode?

A toilet with a flush assist system is a water-saving design that has been known to cause a toilet to blow up. There are some particular brands that have had recalls, over 2 million toilets, happen when there is stored pressure within the toilet system. This design is intended to empty water from the tank by pushing the water. When it reaches the weld seal, that pressure can cause the toilet to explode.

If you are not comfortable with doing your own toilet repair, calling a plumber is understandable. A professional plumber can perform toilet repair and installation quickly and correctly. With one of the many DIY videos and with retail home improvement stores, you can also learn how to do your own toilet repairs. Call 404-475-3009 today for toilet repair service in Marietta, GA.

How to Fix a Toilet That Keeps Running?

How to Fix a Toilet That Keeps Running?

Are you wondering how to fix a toilet that keeps running? Toilet repair can provide assistance when your toilet is demonstrably acting up and having issues. Nonetheless, there are some troubleshooting maneuvers that you can utilize to try to fix your toilet before you call your local, reputable plumber. Please review the following steps that you can take to fix your toilet when it keeps running.

  • The first thing that you should do is flush the toilet and look for a fill valve leak.
  • To do so, you will lift up on the toilet float arm. Review the tank while it is filling to see if the water stops. 
  • Adjust or bend the toilet float arm so the tank stops filling when the water level is ½ to one-inch below the top of the overflow pipe.

If you have done all of these steps and the fill valve still leaks, then contact your local, certified plumber.

toilet repair

What are the Parts Called Inside a Toilet?

If you are unfamiliar with toilets, now is as good a time as any to further acquaint yourself. According to leading research found online, there are, practically speaking, only two main toilet parts. These two main parts are the toilet flush valve and the fill valve. The fill valve lets water refill the tank after the flush. The flush valve lets water gush into the toilet bowl during the flush. Each of these valves needs to be working in tandem with the other in order for your toilet to have maximum optimization.

How Do You Fix a Toilet That Will Not Flush?

For homeowners who have a toilet that is not flushing, it will be pertinent to find out sooner than later how to fix it. Thankfully, there are some basic steps that you can take to fix your toilet. To begin with, check the flush handle and adjust the handle as needed if it is either too loose or too tight. After that, you can check the flush level lift arm and adjust or replace it as necessary. You will also want to check the lift chain and make sure that it is correctly attached to both the lift arm and the flapper, which is located at the base of the flush valve.

Is it Okay Not to Flush Pee?

This is an odd question, but it is a question that arises frequently when toilet repair comes into the equation. It’s vital to note that urine is normally sterile as a body fluid. Even if an individual were to have a urinary tract infection, it would be inactivated with the chlorine levels in the public water supply. According to precedent, there’s no known disease transmission with urine that is left unflushed in the toilet.

Can Bleach Unclog a Toilet?

Bleach performs wonders at cleaning surfaces in a household. Yet the question remains: can bleach unclog a toilet? According to a leading plumbing company, there is a scenario where bleach can be used to unclog a toilet. In order to commence the process, you will need to pour two to three cups of bleach into the toilet. Next, you will wait for ten minutes. By waiting ten minutes, you will give the bleach time to work on the clog. After the time has elapsed, you can turn on the water valve and flush the toilet. It’s always best to get an expert’s opinion before using chemicals handily, so research and dispense advice carefully. 

Can You Repair Toilet Fill Valve?

If your toilet fill valve needs to be repaired, you will need to have the right tools to complete the process. Toilet fill valves, also known as ballcocks, can be repaired with a Fluidmaster brand valve. Usually, the repairing process for a toilet fill valve involves simply replacing the entire fill valve. However, with a Fluidmaster toilet fill valve, it can be repaired by simply replacing a seal inside the unit.

Are Toilet Repair Kits Universal

Have you heard of toilet repair kits? Toilet repair kits supposedly allow for a full overhaul of your toilet. These kits are designed to fix problems that include slow refilling of your toilet, and running and noisy toilets. Some kits have a universal design that is optimized to uniformly fit all brands and features. This means that such kits have a large range of adjustability.

How Repair Toilet Flush

Are you wondering how you can repair your toilet flush? Inevitably, calling a certified and licensed plumber is the best way to move forward. While many websites advertise do-it-yourself solutions, you may not be prepared to follow through with the procedure as outlined. A plumber will have experience in such matters, and be able to come up with an effective solution in a short amount of time.

toilet repair

How Repair Toilet Flange

Your local, reputable plumber will be able to replace your toilet flange so that your water levels are normal for your toilet. The sooner you get your toilet repaired, the sooner your home’s hygiene parameters can get back to normal.

When you need toilet repair in Marietta, GA, trust a certified plumber. Our team at Plumbers 4 Real is capable and ready to help. Please reach out to us at 404-475-3009.

What is a rough plumbing inspection?

Inspecting plumbing under sink

Plumbing inspection process

Typically, a plumbing inspection is the process of checking of an existing  home or any structure that has plumbing, to investigate the current condition. Typically, this is thought to be for a property is being sold to assure a potential buyer of its condition. There is also a plumbing inspection for new construction that is making sure everything is up to building code. 

Once you own a home, you don’t think that plumbing and inspection will ever be two words used again unless you do some remodeling or add-on construction. However, and most homeowners are not aware of, having a plumbing inspection for their home periodically as part of the regular maintenance plan can be helpful. 

In this article, we are going to answer questions about plumbing inspection, review the process and what a plumbing inspection checklist may include. We will provide a plumbing inspection example and explain why each of the things in the inspection are important. By the end of this piece, you will see the value add of having a routine plumbing inspection for your home.

What does a plumbing inspector look for?

Having a professional plumbing inspection can provide a homeowner several major benefits compared to performing a plumbing inspection yourself. With the experience and expertise of a professional plumber, they will do a comprehensive check of the following items: 

  • Drains and Faucets
  • Showers and Tubs
  • Toilets
  • Pipes and Supply lines
  • Dishwasher and Garbage Disposal – lines and unit
  • Water heater
  • Washing Machine – connections, hoses, and lines

The inspection will include check the complete health condition of plumbing system, including the water pressure. The plumber will then provide you an inspection report that includes notes and recommendations. You can use this for a checklist in getting things done before they become an emergency problem, whether you do it yourself or have it done.

Why is having a plumbing inspections important? The are a few reasons that are beneficial to having a plumbing inspection on a routine basis: 

  • Protection for Your Home – Extensive damage can occur from even a minor plumbing problem, putting the integrity of your home’s structure in jeopardy and destroying your property. Most homeowners are not trained in all things plumbing, so having the experience and trained eyes of a plumber can be crucial in preventing a plumbing nightmare.
  • Money Saver – Yes, spending money on a professional plumbing inspection is going to save money in the end. The smallest leak can cause expensive damage when left undetected by the untrained. Beyond property and structure damage, your personal items are risk of being damaged too, including heirlooms, keepsakes, and pictures. The ceiling, drywalls, and floors can be replaced, those personal items cannot. 
  • Peace of Mind – As a homeowner, locating a leak can be scary if you can’t determine where it is coming from and what has caused, both of which are important in correcting problem. With a  routine plumbing inspection, the smallest of leaks will be detected and fixed. This can give you  great comfort and peace of mind knowing that the plumbing in your home is working right and your  home is safe from damage. 

How do I pass a plumbing inspection?

If the plumbing inspection is maintenance purpose, there is no need to worry about passing a plumbing inspection. However, if you’re selling your home, you want to make sure that all is right for the plumbing inspection so that nothing cancels or delays the sale. The areas that you want to focus on for the plumbing inspection are:

The Bathrooms: This area has a heavy traffic flow for most homes and the most plumbing issues.  Areas the plumbing inspection will include, and you want to give special attention are: 

  • Faucets
  • Drains
  • Toilets
  • Caulking

Miscellaneous Plumbing Inspection Areas: Consider this the catch-all category of a plumbing inspection. 

  • The Water heater 
  • Sump pumps 
  • Spigots and in-ground sprinklers
  • Washing machine connections and drainage

The Kitchen: Another heavily used room in most houses and another room with a lot of plumbing and potential problems.

  • Sinks
  • Faucets
  • Shutoff valves
  • Garbage disposals
  • Dishwashers
  • Refrigerators

The Septic and Sewer: If you have maintained regular maintenance on these areas,  there shouldn’t be any issue. Preventing stoppages in the main sewer line or septic system can be unhealthy and expensive.

  • Septic system drain field 
  • Sewer mains
  • Vent pipe

How do I know if my plumbing is bad?

Plumbing problems aren’t always obvious, and it is those hidden problems that can cause the most damage to your home. When there is a plumbing problem discovered, it needs to be fixed immediately to stop potential damage. Signs of possible plumbing problems include any of the following: 

  • Dripping Faucets: This is annoying and may seem to be a minor issue, but it is costing you each month on your water bill and it is wasting one of our natural resources. 
  • Clogged and Slow Drains: A basic household plunger can often fix a clogged or slow drain, but when there is an odor coming from the drain, you may have a bigger problem hidden in the pipes. If the plunger, over-the-counter products, or home remedies don’t clear a clog or slow drain, and the odor is still present, call a professional plumber. They will do a plumbing inspection to find the problem and then advise what needs to be done. 
  • Weak Water Pressure: If the water only trickles when you turn on a faucet or spigot, there could be residue in the pipes, a leaking pipe, or other issues. Look for the obvious and if you aren’t able to pinpoint a problem, schedule a plumbing inspection with a professional plumber. 
  • Running Toilets: This is as annoying and expensive as a dripping faucet and wasting a natural resource too. 
  • Smells and Stains: Water stains on the ceiling, floors, or walls that are accompanied by a musty odor is often related to a water leak. These stains will mildew and grow mold, making your home unhealthy. A professional plumbing inspection can locate the problem and get if fixed, then you can have a contractor repair the ceiling, floors, and walls where the damage has happened. 
plumbing equipment for repair

What are the signs of a broken sewer pipe?

One thing you don’t want a plumbing inspection to find when trying to sell your home is sewer line problems. If you have any of the following, before the inspection, get these remedied or you’ll never sell your home: 

  • CLOGS: Occasional clogs are expected, but when the clog is on a daily basis or the drains are slow, there is an obstruction somewhere along the line to the sewer line and may be in the sewer line.  A professional plumbing inspection can locate the exact area and problem so that you can get it repaired before placing your house on the market. 
  • SOGGY: A leaking sewer line will create soggy areas in the yard. This is often caused by tree roots busting the pipe, or the pipe as reached its life capacity. A professional plumbing inspection will locate the exact area and problem, then get it fixed for you, getting your house one step closer to selling it.
  • ODORS: You know what goes into a sewer line and if you’re smelling it outside in the yard, you have a sewer line problem. Call your plumber immediately for a plumbing inspection and have the problem fixed, even if you aren’t selling the house, this is unhealthy. 

So, can bad plumbing make you sick? Absolutely! When there are plumbing leaks undetected inside the home, mildew and mold begin to grow.  This can irritate anyone with allergies or breathing issues and if you don’t have those already, they can begin to develop.  Sewer lines that aren’t draining properly are not getting rid of the wastewater which means that sewage is sitting under your home or in the pipelines. To get started on your plumbing inspection in Marietta, GA, call 404-475-3009 today!

Are Water Heater Repairs an Emergency?

water heater in basement

Why do you need water heater repairs?

Well, the answer to that question is answered by another question: Are you the one taking a shower when the water heater quits working? Yeah …. It is all about perspective isn’t it?  If you’re not in the shower when the water heater quits, then water heater repair isn’t an emergency to you, right? Unless you know how to fix a hot water heater, then maybe you wouldn’t be so concerned. 

Water heater repairs are needed so that you can have hot water and to save money by not buying a new water heater. Sometimes, a water heater can go out at the wrong time of the month, when all the bills are due, and the funds are short to replace the unit. So, water heater repair is the next best thing. Gets you hot water again without costing a lot of money and a professional plumber can advise you What heater repair or replacement is best for the situation at hand. 

What is hot water heater repair? 

The standard water heater has an insulated storage tank. These tanks hold anywhere between thirty gallons to eighty gallons. For as much as they are used, water heaters are an unsung hero in every home, a  reliable appliance – until it quits working. Some common water heater repairs are: 

  • No Hot Water: A cold shower isn’t for everyone and when the water heater stops making hot water, it is time to check things out. If you have a gas water heater, check the pilot light and electric water heater, check the breaker. It could be the control valve, thermocouple, thermostat, or heating element. These are all things that water heater repairs can fix. 
  • Insufficient Hot Water: If you start out with hot water and it goes cold pretty quickly, there can be several issues causing that, and water heater repair may or may not be the answer. A professional plumber can check your water heater out and let you know the prognosis. It may be a temperature setting, and that is something you can check. It could be a heating element or sediment build up in the tank. 
  • Odor or Rust Color Water:  When you turn on the faucet and the water is rusty-looking or has an odor like rotten eggs, there are bacteria built up in the tank. Flushing it may help, which you can do yourself following the manufacturer’s instructions, or schedule water heater repairs with a professional plumber. Either way, you need to get that bacteria out of there. 
  • Strange Sounds: A water heater should be relatively quiet. If you’re hearing mysterious sounds, hissing, popping, or rumbling noises, that is usually an indication of sediment built up inside the tank. Again, flushing can help this, and sometimes, other water heater repairs are needed by a professional. 
  • Water Heater Base Leaking: This is a nuisance and usually a leaking water heater may not be salvaged with water heater repairs. A professional plumber can inspect the water heater and let you know. Sometimes, it is a fault temperature and pressure relief valve, or even a leak from another plumbed appliance. 

What would cause a hot water heater to stop working?

In addition to the things we just mentioned above, other possible water heater problems like no hot water can too high water pressure coming into the house. The biggie that many water hear repairs find is the lack of maintenance by homeowners.  As we said earlier, the water heater ist the unsung hero. We have them installed and go about our day.  Review the manual that comes with your water heater and following recommendations of flushing the tank.  This will keep your water heater working better and longer without water heater repairs. 

What is the most common problem with water heaters?

The most common problem that technicians find on water heater repair service calls is a leaking water heater. The first thought that people have is the tank is leaking, but it isn’t always the tank. Sometimes, the water heater repair is nothing more than replacing a broken drain valve or turning the water pressure down at the meter. Other cause of water leaking could be the sediment build up inside the tank, which goes back to the maintenance issue we mentioned above. 

Do you call a plumber to fix a hot water heater?

In most cases, yes, water heater repair calls should go to a certified plumber. There are possible other water heater issues that could require an electrician: 

  • Circuit Breaker Keeps Tripping
  • Fuse Keeps Blowing or Overheating
  • Wiring Has Come Loose Causing Reset Button to Trip

What are the signs of a failing water heater?

There are five indications that you may need water heater repair or replacement:

  • Never enough hot water
  • Loud noises of gurgling, popping, rumbling
  • Cloudy or colored water
  • Pressure Relief Valve leaking
  • Water leaking from tank 
water heaters installation

What is the lifespan of a water heater?

The lifespan of a water heater can vary from brand and quality. Other factors that can make a longer or shorter lifespan for a water heater is the water quality and homeowner routine maintenance like draining and flushing the tank.  With a good quality water heater on a good water system and routine maintenance, you can expect 15 years average lifespan. 

Remember, your water heater is the unsung hero of your house. Take care of it with proper routine maintenance, and it will give you a long life of hot water, probably longer than the average of 15 years. Call 404-475-3009 today for your water heater system in Marietta, GA. 

What is the Best Pipe to Use for Plumbing?

commercial plumbing

What is the Best Pipe to Use for Plumbing?

Are you wondering what the best pipe to use for plumbing is? There are many different types of pipes on the market. As a matter of fact, copper pipes are popular both for cold and hot water pipes. This is because they are heat resistant, corrosion-resistant, and possess natural anti-microbial properties. However, all of these excellent traits come with a price. Copper pipes are more expensive than plastic pipes. It’s important to understand that there is a range of pipe options in the plumbing industry. These options range from galvanized steel to copper, polyvinyl chloride, chlorinated polyvinyl chloride, and cross-linked polyethylene.

How Do You Do Commercial Plumbing

Commercial plumbing is a very important and strenuous job. If you are wondering how commercial plumbing is accomplished, the first thing to understand is what a tremendous responsibility falls on a commercial plumber’s shoulders. While it is true that plumbing follows the same principles from property to property, for commercial applications the job is much bigger and harder. Bigger plumbing installations mean more expensive, finer tools. It also means that the plumber should have many years of experience and expertise. A plumber becomes certified through a series of tests, examinations, and apprenticeships. In order to be taken seriously as a commercial plumber, the plumber should probably be a journeyman or master plumber.

What is the Biggest Plumbing Company?

There are many big plumbing companies across the United States. One of the biggest plumbing companies in America is Roto-Rooter. The reason why this company is so large is that it is a very effective plumbing company that many people have come to rely on for its services. The ease of availability coupled with reliable services makes Roto-Rooter an excellent plumbing competitor.

What is the Difference Between Commercial and Residential Plumbing?

Are you wondering what the difference is between commercial and residential plumbing? Please review the following bullet-pointed list to discover more.

  • Commercial plumbing receives greater use. This means that the plumbing system in a commercial property must be built to withstand strenuous use. More pipes and outlets will be required as well. 
  • Complexity. For residential homes, the plumbing system is fairly simple and straightforward when compared to commercial properties. For example, there can be multiple floors, a lot of toilets and several kitchens or laundry rooms. There will need to be enough hot water for all the appliances and a good sewage system designed to funnel waste away properly.
  • Cost and expense. The whole plumbing system of a commercial property will be valued higher than the plumbing system of a home. Consequently, if there is a large plumbing problem in a commercial property, then it has the potential to be quite disastrous.

What Brand Faucets Do Plumbers Recommend?

There are a variety of different faucet brands available on the market. But which one is the best? According to a leading plumbing website, there are a number of different faucet brands that plumbers trust. The Moen Arbor Touchless Faucet has received excellent reviews. The best dual handle faucet is apparently the Delta Faucet Windemere 2-Handle. The best budget model is the WEWE Single Handle High Arc. If you are thinking about a new faucet installation, it is important for you to do appropriate research. For example, what kind of finish do you want? What material do you want the faucet to be made out of? What budget do you have? All of these are important considerations.

Is Commercial Plumbing Hard

If you are wondering whether commercial plumbing is hard, you must first consider what it takes to be a plumber. Expertise, certifications, and research are what distinguish plumbers from handymen. In addition, commercial plumbing is indeed harder than residential plumbing because it requires large pipes, proper planning, and high-quality materials. Commercial plumbing must be precise and have endurance, which is why it is very important to hire an experienced plumbing company with a good reputation for your commercial plumbing services.

How Commercial Plumbing Works

Commercial plumbers have the task of installing plumbing elements like kitchen fixtures, bathroom fixtures, drinking fountains, sprinkler systems, and more. Each of these plumbing fixtures must be installed properly and with the right materials. Maintenance for these commercial plumbing systems includes fixing drain leaks and repairing pipes and water and sewer lines.

What is Commercial Plumbing

Commercial plumbing systems are equipped to bring water into the facility and funnel waste away from the facility. 

commercial plumbing

What to Know About Commercial Plumbing

If there is a problem with your commercial plumbing, it is best to act sooner rather than later. Bad plumbing problems have a nasty habit of only getting worse before they get better. Please be sure to consult with a reputable plumbing company for all of your commercial plumbing services.

If you need help with your commercial plumbing in Marietta, GA, you need plumbers that you can rely on. Please give our team a call at 404-475-3009.

How Do You Check For Plumbing Inspection?

Technician servicing the gas boiler for hot water and heating

Learn More About a Plumbing Inspection

Your plumbing system will run into problems along the line which will arise the need for a plumbing inspection in order to pinpoint problems areas. Even if problems aren’t immediate your property will still require a plumbing inspection to be conducted every so often in order to make sure that all systems are in good condition. With a plumbing inspection, you’ll be able to catch problem areas in their beginning stages before they affect other areas and worsen. It’s important to get in touch with certified plumbers when you’re looking into a plumbing inspection so that you may have recommendations that best match with your particular property specifications. In order to learn a bit more about a plumbing inspection and what it entails, here is some general background information that may be of use to you.

What happens during a plumbing inspection?

A plumbing inspection is designed to encompass the entirety of your property’s plumbing system in order to see the complete picture of its health, immediate needs, and future projects. The entire plumbing system will involve your sinks, faucets, washer, pipes, toilets, shower, bath, water lines, sewer lines, and other appliances such as water heaters or boilers. Proper water pressure will be tested and your water heater and toilets typically will have special attention placed upon them. 

What is a rough plumbing inspection?

A rough plumbing inspection is considered to involve a property where only water supply and drain pipes are running while sinks, faucets, and other fixtures are not installed as of yet.

How long does a plumbing inspection take?

A plumbing inspection will take two hours to complete on average but the amount of time will largely depend on the size of your property and the number of problems discovered. 

How often should you check your plumbing?

A plumbing inspection should be conducted by a professional at least once every two years while some recommend every year. 

How do I know if my plumbing is bad?

A plumbing inspection will be the best indicator to professionally measure if there is something wrong with your plumbing. There are some signs, however, where you may be able to tell that repairs need to be made. If you constantly are getting low water pressure around the house this could point to problems with your pipes. If you see stains on your walls then there could be that there is a leak present in the pipes behind them. With unpleasant smells coming from the drain, there could be pipe corrosion, water tank sediment, or leaks with your sewer line. What’s more, discolored water will point towards corrosion, rust or sediment buildup. Lastly, hearing odd sounds with your pipe can indicate high water pressures, loosened pipe connections, a bad water heater, leaks, and other possibilities.

Leakage Of Water From Stainless Steel Pipe On Gray Background

What are the most common plumbing problems?

  • Dripping faucets.
  • Slow draining sink.
  • Clogged bath or shower drain.
  • Clogged toilet.
  • Running toilet.
  • Faulty water heater.
  • Low water pressure.
  • Jammed garbage disposal.
  • Leaky pipes.
  • Sewer system backup.

Can bad plumbing make you sick?

Bad plumbing does have the ability to make you sick as you could be exposed to Salmonella, Hepatitis, or E.Coli from everyday tasks such as washing your hands to showering. It’s important to have a water quality test conducted for your property in case the issue is the quality of the water you get from your city. With this, you may be able to implement a whole house water purification system for a healthier water output. If it isn’t that, a plumbing inspection should be conducted to see if piping materials or your water heater are worn, rusting, or causing unnatural build up.

How much does it cost to run a camera down a sewer line?

A video camera plumbing inspection will incorporate the use of state of the art equipment that can track and locate problem areas and will tend to be more expensive than a regular plumbing inspection. Depending on the circumstances, prices can range from a few hundred to a couple of hundred dollars. Professional plumbers will typically charge a flat rate for this service yet it depends on the company that you go with for this type of plumbing inspection service.

How do you check for water leaks in your pipes?

If you don’t have a water leak detection tool as used by professionals you may be able to conduct an amateur plumbing inspection of your property to see if there is a leak. First, make sure that there isn’t any water being used in the house. Then, locate you water meter and check to see if the leak indicator is moving. If you don’t have a leak indicator turn off your water and allow water to drain out of the house. If you hear the sound of water moving in the pipes or notice your water meter is still active then you may have a leak. 

What is considered a plumbing emergency?

A plumbing emergency will consist of situations where the structure of the property is put at risk or the production or use of water is prevented. Such events like with flooding, sewer backups, burst pipes, and lack of any water can be considered to be emergency plumbing situations. A plumbing inspection should be conducted with your emergency plumbing situation as it can localize problem areas, find other problems that are adding to the issue, and back up any insurance claims that need to be made.

Get Help From a Professional Today

If you’re in need of a plumbing inspection for your property count on the services of your local plumber. A qualified plumber will be able to make sure all areas of your home are well maintained and let you know of any cases that need to be addressed. Ensure a properly working plumbing system by scheduling an appointment with your qualified, local plumbing company today.

If you’re interested in a plumbing inspection in Marietta, GA call 404-475-3009 with Plumbers 4 Real!

Why Did My Garbage Disposal Stop Working?

garbage disposal repair

Why Did My Garbage Disposal Stop Working?

Are you in need of garbage disposal repair? The fact of the matter is that there could be many reasons why your garbage disposal isn’t working. First and foremost, it is important to understand what foods and liquids not to put down your garbage disposal, so that you can avoid having to get garbage disposal repair in the first place. Please review the following list to discover more about what not to put down your garbage disposal.

  • Grease and oil. Grease and oil are very bad for your disposal. This is because clogs develop as a result of grease and oil mingling with food scraps and hair follicles. It is always best to pour oil and grease into a separate receptacle or container which can then be put in the trash.
  • Coffee grounds. Coffee grounds have a bad habit of creating clogs too. Over time, coffee grounds can get stuck inside the trap of your disposal.
  • Pits and seeds. Anything as hard as a pit or seed will have a negative impact on the blades and inner workings of your garbage disposal.
  • Celery. Celery is fibrous and the fibers can become entangled in your garbage disposal and grease trap.
  • Rice and pasta. When rice and pasta harden, they can cause a lot of trouble for your garbage disposal.
  • Egg shells. Egg shells can be composted or thrown away, but they should not be put down the sink.
  • Animals bones. Animal bones are extremely rigid and will damage the blades of your garbage disposal over time.

Can a Garbage Disposal Be Fixed?

Are you wondering whether or not your garbage disposal can be fixed? A simple call to a local, reliable, and certified plumber will be the best course of action. In order to find a reputable plumber in your area, ask your friends or neighbors for a referral. It’s always best to consult a plumber with many years of experience versus a handyman without credentials or references.

Do I Need A Plumber to Replace a Garbage Disposal?

If you are requiring a garbage disposal removal and replacement, it is always a good choice to select licensed and insured plumbing professionals. That is because in order to become a plumber, an individual must go through many years of training and experience. They must pass tests in order to become certified. If anything goes wrong with your garbage disposal removal and replacement, a certified plumber will have access to insurance and be able to make the necessary repairs.

Can a Plumber Fix a Garbage Disposal?

The simple and best answer to whether or not a plumber can fix a garbage disposal is, of course, yes. Plumbers are licensed and trained to handle all manner of plumbing fixtures. The more years of experience a plumber has, the better. A master plumber, for instance, will have more experience than a journeyman plumber.

Can You Still Use the Sink if the Garbage Disposal is Broken?

It is important for homeowners to understand the nature of the connections between the garbage disposal to the sink and the dishwasher. The dishwasher discharge of wastewater is usually connected through the garbage disposal. This is because the garbage disposal occupies one of the drains of the dual sink. The dishwasher drains and discharge will not be impacted by a  broken garbage disposal. 

Garbage Disposal Not Jammed But Humming

Is your garbage disposal humming? If so, it is a signal that there is power flowing through the unit, but the blades are not turning. As a matter of fact, the humming sound could be a sign that the motor is clogged or jammed, which has resulted in the failure of the machine to grind properly. A reputable plumber will be able to get to the bottom of the issue.

Garbage Disposal Repair Services Near Me

The best way to find a garbage disposal repair service is to type in those words into a search engine. Smart technology will be able to pinpoint your location and the nearest plumber to your location.

Garbage Disposal Jammed With Glass

If your garbage disposal is jammed with glass, you are not alone. Many homeowners experience this event in their lifetime. Apparently, it is possible to use a hex key on the bottom of the disposal to help dislodge any glass that is blocking the blades.

garbage disposal repair

Garbage Disposal Jammed with Potato Skins

If your garbage disposal is jammed with potato skins, there is a natural remedy available. You can use salt and baking soda to remove the offending clog. You can pour half a cup of salt and half a cup of baking soda down the drain. Follow this with six cups of boiling water. Let sit overnight and then flush with water. The hot water will be able to break up the clog and the baking soda and salt will act as an abrasive.

Our company can help you with your plumbing repair. Our staff at Plumbers 4 Real are ready to take your phone call at 404-475-3009. Discover more about how we can enable your garbage disposal repair in Marietta, GA!