Author Archives: Plumbers 4 Real

How do I fix my toilet?

toilet in bathroom

What are the parts called inside a toilet?

 The “throne” as it is often referred to, is one fixture in a home that we depend on to always be there and in working order. Unfortunately,  like other things we come to depend on, toilets break, and toilet repair becomes necessary. With a toilet, there are many components within them that can be the problem.

A toilet basically has several moving parts, and those moving parts will break or wear out from use. Toilet repair doesn’t always require the services of a professional plumber if you learn the various parts in the tank and how it all works.

Take the time now to learn your toilet as we describe the various parts inside the tank so you’ll be better prepared for toilet repair. Placing the tank lid to the side, we’re going to describe a standard flush toilet that is found in most homes:  

  • The Handle and Flush Rod: The handle is the part you use to flush the toilet. The flush rod is attached to the flush rod which has a chain attached to it.
  • The Lift Chain: Extended from the handle horizontally is the lift rod which has a chain connected to it vertically descending to the tank bottom. This mechanism is what initiates the flush valve and allows the water to flush down through the toilet bowl. A toilet repair chain is usually shortening the chain or replacing the chain is one of the most common of toilet repairs.
  • The Flapper: There is a rubber flapper connected to the lift chain that is against the flush valve. When the handle is pressed down, the chain pulls the flapper up and the water inside the tank empties out.
  • The Flush Valve: At the tank bottom is a metal or plastic part that forms an opening that the water drops from when leaving the tank when the flush has begun. The flush valve and the vertical are usually connected to the overflow tube in a one-piece construction with a large O-ring seal fitting around the flush valve below the tank, often referred to the tailpiece.
  • The Overflow Tube: The overflow tube is attached to the flush valve, providing a safety measure that keeps the tank water from overflowing if there is a failure with the water supply valve.
  • The Shutoff Valve: On the exterior of the toilet, there is a water supply pipe that allows cold water into the toilet, located close to the floor to the left side and under the tank.
  • The Supply Tube: Coming from the shutoff valve and going to the water supply tailpiece at the toilet tank bottom is a steel mesh, plastic, or vinyl supply tube.
  • The Ballcock: Inside the tank, the ballcock, a vertical assembly, typically mounted on the tank’s left side that opens the supply of freshwater that refills the tank after the flush has completed.
  • The Float Ball: There is a floating device on all supply valves that senses when the water level inside the tank has reached the required level, then shuts the water supply off.
  • The Refill Tube: A flexible, small tube is clipped on the overflow tube at the top that has water coming from the water supply valve and refills the tank after the flush.
  • The Toilet Bowl: This is where you sit, the “throne” and it is bolted to the floor. A common toilet repair bolt to floor needs to be replaced or tightened.
  • The Wax Ring: Under the “throne” is a wax ring that creates a seal to connect the toilet to the drain, fitting to the flange. When a new wax ring is required, a toilet repair flange may be required.

What’s wrong with my toilet?

Some common toilet repairs that you may be faced with are:

A Running Toilet: A constant running toilet could be the flapper not sealing to the flush valve, allowing water to keep running. If the flapper is good order, replace the flush valve.

A Leaking Toilet: This can be one of several issues as described and should be addressed promptly to avoid waste of water and more damage. 

  • Water Supply Valve Leaking 
  • Supply Line Leaking
  • Toilet Bowl and Tank Connect Leaking
  • Toilet and Floor Connection Leaking
  • Tank Leaking at The Side

Can a toilet fill valve be repaired?

The fill valve will wear out in any toilet that is used regularly. The following are indications that you need to learn and recognize that will tell you it is toilet repair is needed by replacing the fill valve.

  • Loud Sounds: When the toilet is humming and screaming, it is typically when the ballcock metal parts wear out, not allowing the valve to open or close easily. This forces the water to flow through the hole, creating the loud sounds.  
  • Toilet Running: A flapper leaking will keep the water draining slowly and the fill valve will constantly run to fill the tank.
  • Valve Whistling: When there is a high-pitched sound coming from the ballcock valve opening, it is typically a toilet repair requiring a replacement of the ballcock.

How do you fix a weak flushing toilet?

When a toilets is used for some time, the flush can become weak. This can often be from calcium, lime, and other minerals building up inside the tank that block or restrict the water flowing, creating an incomplete flush.  Two ting that are an easy toilet repair is simply cleaning or replacing are:

  • Cleaning the feed holes and jet holes inside the toilet
  • Check the tank water level, the flapper maybe need adjusting or replaced
toilet bowl running correctly

Why did my toilet explode?

A toilet with a flush assist system is a water-saving design that has been known to cause a toilet to blow up. There are some particular brands that have had recalls, over 2 million toilets, happen when there is stored pressure within the toilet system. This design is intended to empty water from the tank by pushing the water. When it reaches the weld seal, that pressure can cause the toilet to explode.

If you are not comfortable with doing your own toilet repair, calling a plumber is understandable. A professional plumber can perform toilet repair and installation quickly and correctly. With one of the many DIY videos and with retail home improvement stores, you can also learn how to do your own toilet repairs. Call 404-475-3009 today for toilet repair service in Marietta, GA.

How to Fix a Toilet That Keeps Running?

How to Fix a Toilet That Keeps Running?

Are you wondering how to fix a toilet that keeps running? Toilet repair can provide assistance when your toilet is demonstrably acting up and having issues. Nonetheless, there are some troubleshooting maneuvers that you can utilize to try to fix your toilet before you call your local, reputable plumber. Please review the following steps that you can take to fix your toilet when it keeps running.

  • The first thing that you should do is flush the toilet and look for a fill valve leak.
  • To do so, you will lift up on the toilet float arm. Review the tank while it is filling to see if the water stops. 
  • Adjust or bend the toilet float arm so the tank stops filling when the water level is ½ to one-inch below the top of the overflow pipe.

If you have done all of these steps and the fill valve still leaks, then contact your local, certified plumber.

toilet repair

What are the Parts Called Inside a Toilet?

If you are unfamiliar with toilets, now is as good a time as any to further acquaint yourself. According to leading research found online, there are, practically speaking, only two main toilet parts. These two main parts are the toilet flush valve and the fill valve. The fill valve lets water refill the tank after the flush. The flush valve lets water gush into the toilet bowl during the flush. Each of these valves needs to be working in tandem with the other in order for your toilet to have maximum optimization.

How Do You Fix a Toilet That Will Not Flush?

For homeowners who have a toilet that is not flushing, it will be pertinent to find out sooner than later how to fix it. Thankfully, there are some basic steps that you can take to fix your toilet. To begin with, check the flush handle and adjust the handle as needed if it is either too loose or too tight. After that, you can check the flush level lift arm and adjust or replace it as necessary. You will also want to check the lift chain and make sure that it is correctly attached to both the lift arm and the flapper, which is located at the base of the flush valve.

Is it Okay Not to Flush Pee?

This is an odd question, but it is a question that arises frequently when toilet repair comes into the equation. It’s vital to note that urine is normally sterile as a body fluid. Even if an individual were to have a urinary tract infection, it would be inactivated with the chlorine levels in the public water supply. According to precedent, there’s no known disease transmission with urine that is left unflushed in the toilet.

Can Bleach Unclog a Toilet?

Bleach performs wonders at cleaning surfaces in a household. Yet the question remains: can bleach unclog a toilet? According to a leading plumbing company, there is a scenario where bleach can be used to unclog a toilet. In order to commence the process, you will need to pour two to three cups of bleach into the toilet. Next, you will wait for ten minutes. By waiting ten minutes, you will give the bleach time to work on the clog. After the time has elapsed, you can turn on the water valve and flush the toilet. It’s always best to get an expert’s opinion before using chemicals handily, so research and dispense advice carefully. 

Can You Repair Toilet Fill Valve?

If your toilet fill valve needs to be repaired, you will need to have the right tools to complete the process. Toilet fill valves, also known as ballcocks, can be repaired with a Fluidmaster brand valve. Usually, the repairing process for a toilet fill valve involves simply replacing the entire fill valve. However, with a Fluidmaster toilet fill valve, it can be repaired by simply replacing a seal inside the unit.

Are Toilet Repair Kits Universal

Have you heard of toilet repair kits? Toilet repair kits supposedly allow for a full overhaul of your toilet. These kits are designed to fix problems that include slow refilling of your toilet, and running and noisy toilets. Some kits have a universal design that is optimized to uniformly fit all brands and features. This means that such kits have a large range of adjustability.

How Repair Toilet Flush

Are you wondering how you can repair your toilet flush? Inevitably, calling a certified and licensed plumber is the best way to move forward. While many websites advertise do-it-yourself solutions, you may not be prepared to follow through with the procedure as outlined. A plumber will have experience in such matters, and be able to come up with an effective solution in a short amount of time.

toilet repair

How Repair Toilet Flange

Your local, reputable plumber will be able to replace your toilet flange so that your water levels are normal for your toilet. The sooner you get your toilet repaired, the sooner your home’s hygiene parameters can get back to normal.

When you need toilet repair in Marietta, GA, trust a certified plumber. Our team at Plumbers 4 Real is capable and ready to help. Please reach out to us at 404-475-3009.

What is a rough plumbing inspection?

Inspecting plumbing under sink

Plumbing inspection process

Typically, a plumbing inspection is the process of checking of an existing  home or any structure that has plumbing, to investigate the current condition. Typically, this is thought to be for a property is being sold to assure a potential buyer of its condition. There is also a plumbing inspection for new construction that is making sure everything is up to building code. 

Once you own a home, you don’t think that plumbing and inspection will ever be two words used again unless you do some remodeling or add-on construction. However, and most homeowners are not aware of, having a plumbing inspection for their home periodically as part of the regular maintenance plan can be helpful. 

In this article, we are going to answer questions about plumbing inspection, review the process and what a plumbing inspection checklist may include. We will provide a plumbing inspection example and explain why each of the things in the inspection are important. By the end of this piece, you will see the value add of having a routine plumbing inspection for your home.

What does a plumbing inspector look for?

Having a professional plumbing inspection can provide a homeowner several major benefits compared to performing a plumbing inspection yourself. With the experience and expertise of a professional plumber, they will do a comprehensive check of the following items: 

  • Drains and Faucets
  • Showers and Tubs
  • Toilets
  • Pipes and Supply lines
  • Dishwasher and Garbage Disposal – lines and unit
  • Water heater
  • Washing Machine – connections, hoses, and lines

The inspection will include check the complete health condition of plumbing system, including the water pressure. The plumber will then provide you an inspection report that includes notes and recommendations. You can use this for a checklist in getting things done before they become an emergency problem, whether you do it yourself or have it done.

Why is having a plumbing inspections important? The are a few reasons that are beneficial to having a plumbing inspection on a routine basis: 

  • Protection for Your Home – Extensive damage can occur from even a minor plumbing problem, putting the integrity of your home’s structure in jeopardy and destroying your property. Most homeowners are not trained in all things plumbing, so having the experience and trained eyes of a plumber can be crucial in preventing a plumbing nightmare.
  • Money Saver – Yes, spending money on a professional plumbing inspection is going to save money in the end. The smallest leak can cause expensive damage when left undetected by the untrained. Beyond property and structure damage, your personal items are risk of being damaged too, including heirlooms, keepsakes, and pictures. The ceiling, drywalls, and floors can be replaced, those personal items cannot. 
  • Peace of Mind – As a homeowner, locating a leak can be scary if you can’t determine where it is coming from and what has caused, both of which are important in correcting problem. With a  routine plumbing inspection, the smallest of leaks will be detected and fixed. This can give you  great comfort and peace of mind knowing that the plumbing in your home is working right and your  home is safe from damage. 

How do I pass a plumbing inspection?

If the plumbing inspection is maintenance purpose, there is no need to worry about passing a plumbing inspection. However, if you’re selling your home, you want to make sure that all is right for the plumbing inspection so that nothing cancels or delays the sale. The areas that you want to focus on for the plumbing inspection are:

The Bathrooms: This area has a heavy traffic flow for most homes and the most plumbing issues.  Areas the plumbing inspection will include, and you want to give special attention are: 

  • Faucets
  • Drains
  • Toilets
  • Caulking

Miscellaneous Plumbing Inspection Areas: Consider this the catch-all category of a plumbing inspection. 

  • The Water heater 
  • Sump pumps 
  • Spigots and in-ground sprinklers
  • Washing machine connections and drainage

The Kitchen: Another heavily used room in most houses and another room with a lot of plumbing and potential problems.

  • Sinks
  • Faucets
  • Shutoff valves
  • Garbage disposals
  • Dishwashers
  • Refrigerators

The Septic and Sewer: If you have maintained regular maintenance on these areas,  there shouldn’t be any issue. Preventing stoppages in the main sewer line or septic system can be unhealthy and expensive.

  • Septic system drain field 
  • Sewer mains
  • Vent pipe

How do I know if my plumbing is bad?

Plumbing problems aren’t always obvious, and it is those hidden problems that can cause the most damage to your home. When there is a plumbing problem discovered, it needs to be fixed immediately to stop potential damage. Signs of possible plumbing problems include any of the following: 

  • Dripping Faucets: This is annoying and may seem to be a minor issue, but it is costing you each month on your water bill and it is wasting one of our natural resources. 
  • Clogged and Slow Drains: A basic household plunger can often fix a clogged or slow drain, but when there is an odor coming from the drain, you may have a bigger problem hidden in the pipes. If the plunger, over-the-counter products, or home remedies don’t clear a clog or slow drain, and the odor is still present, call a professional plumber. They will do a plumbing inspection to find the problem and then advise what needs to be done. 
  • Weak Water Pressure: If the water only trickles when you turn on a faucet or spigot, there could be residue in the pipes, a leaking pipe, or other issues. Look for the obvious and if you aren’t able to pinpoint a problem, schedule a plumbing inspection with a professional plumber. 
  • Running Toilets: This is as annoying and expensive as a dripping faucet and wasting a natural resource too. 
  • Smells and Stains: Water stains on the ceiling, floors, or walls that are accompanied by a musty odor is often related to a water leak. These stains will mildew and grow mold, making your home unhealthy. A professional plumbing inspection can locate the problem and get if fixed, then you can have a contractor repair the ceiling, floors, and walls where the damage has happened. 
plumbing equipment for repair

What are the signs of a broken sewer pipe?

One thing you don’t want a plumbing inspection to find when trying to sell your home is sewer line problems. If you have any of the following, before the inspection, get these remedied or you’ll never sell your home: 

  • CLOGS: Occasional clogs are expected, but when the clog is on a daily basis or the drains are slow, there is an obstruction somewhere along the line to the sewer line and may be in the sewer line.  A professional plumbing inspection can locate the exact area and problem so that you can get it repaired before placing your house on the market. 
  • SOGGY: A leaking sewer line will create soggy areas in the yard. This is often caused by tree roots busting the pipe, or the pipe as reached its life capacity. A professional plumbing inspection will locate the exact area and problem, then get it fixed for you, getting your house one step closer to selling it.
  • ODORS: You know what goes into a sewer line and if you’re smelling it outside in the yard, you have a sewer line problem. Call your plumber immediately for a plumbing inspection and have the problem fixed, even if you aren’t selling the house, this is unhealthy. 

So, can bad plumbing make you sick? Absolutely! When there are plumbing leaks undetected inside the home, mildew and mold begin to grow.  This can irritate anyone with allergies or breathing issues and if you don’t have those already, they can begin to develop.  Sewer lines that aren’t draining properly are not getting rid of the wastewater which means that sewage is sitting under your home or in the pipelines. To get started on your plumbing inspection in Marietta, GA, call 404-475-3009 today!

Are Water Heater Repairs an Emergency?

water heater in basement

Why do you need water heater repairs?

Well, the answer to that question is answered by another question: Are you the one taking a shower when the water heater quits working? Yeah …. It is all about perspective isn’t it?  If you’re not in the shower when the water heater quits, then water heater repair isn’t an emergency to you, right? Unless you know how to fix a hot water heater, then maybe you wouldn’t be so concerned. 

Water heater repairs are needed so that you can have hot water and to save money by not buying a new water heater. Sometimes, a water heater can go out at the wrong time of the month, when all the bills are due, and the funds are short to replace the unit. So, water heater repair is the next best thing. Gets you hot water again without costing a lot of money and a professional plumber can advise you What heater repair or replacement is best for the situation at hand. 

What is hot water heater repair? 

The standard water heater has an insulated storage tank. These tanks hold anywhere between thirty gallons to eighty gallons. For as much as they are used, water heaters are an unsung hero in every home, a  reliable appliance – until it quits working. Some common water heater repairs are: 

  • No Hot Water: A cold shower isn’t for everyone and when the water heater stops making hot water, it is time to check things out. If you have a gas water heater, check the pilot light and electric water heater, check the breaker. It could be the control valve, thermocouple, thermostat, or heating element. These are all things that water heater repairs can fix. 
  • Insufficient Hot Water: If you start out with hot water and it goes cold pretty quickly, there can be several issues causing that, and water heater repair may or may not be the answer. A professional plumber can check your water heater out and let you know the prognosis. It may be a temperature setting, and that is something you can check. It could be a heating element or sediment build up in the tank. 
  • Odor or Rust Color Water:  When you turn on the faucet and the water is rusty-looking or has an odor like rotten eggs, there are bacteria built up in the tank. Flushing it may help, which you can do yourself following the manufacturer’s instructions, or schedule water heater repairs with a professional plumber. Either way, you need to get that bacteria out of there. 
  • Strange Sounds: A water heater should be relatively quiet. If you’re hearing mysterious sounds, hissing, popping, or rumbling noises, that is usually an indication of sediment built up inside the tank. Again, flushing can help this, and sometimes, other water heater repairs are needed by a professional. 
  • Water Heater Base Leaking: This is a nuisance and usually a leaking water heater may not be salvaged with water heater repairs. A professional plumber can inspect the water heater and let you know. Sometimes, it is a fault temperature and pressure relief valve, or even a leak from another plumbed appliance. 

What would cause a hot water heater to stop working?

In addition to the things we just mentioned above, other possible water heater problems like no hot water can too high water pressure coming into the house. The biggie that many water hear repairs find is the lack of maintenance by homeowners.  As we said earlier, the water heater ist the unsung hero. We have them installed and go about our day.  Review the manual that comes with your water heater and following recommendations of flushing the tank.  This will keep your water heater working better and longer without water heater repairs. 

What is the most common problem with water heaters?

The most common problem that technicians find on water heater repair service calls is a leaking water heater. The first thought that people have is the tank is leaking, but it isn’t always the tank. Sometimes, the water heater repair is nothing more than replacing a broken drain valve or turning the water pressure down at the meter. Other cause of water leaking could be the sediment build up inside the tank, which goes back to the maintenance issue we mentioned above. 

Do you call a plumber to fix a hot water heater?

In most cases, yes, water heater repair calls should go to a certified plumber. There are possible other water heater issues that could require an electrician: 

  • Circuit Breaker Keeps Tripping
  • Fuse Keeps Blowing or Overheating
  • Wiring Has Come Loose Causing Reset Button to Trip

What are the signs of a failing water heater?

There are five indications that you may need water heater repair or replacement:

  • Never enough hot water
  • Loud noises of gurgling, popping, rumbling
  • Cloudy or colored water
  • Pressure Relief Valve leaking
  • Water leaking from tank 
water heaters installation

What is the lifespan of a water heater?

The lifespan of a water heater can vary from brand and quality. Other factors that can make a longer or shorter lifespan for a water heater is the water quality and homeowner routine maintenance like draining and flushing the tank.  With a good quality water heater on a good water system and routine maintenance, you can expect 15 years average lifespan. 

Remember, your water heater is the unsung hero of your house. Take care of it with proper routine maintenance, and it will give you a long life of hot water, probably longer than the average of 15 years. Call 404-475-3009 today for your water heater system in Marietta, GA. 

What is the Best Pipe to Use for Plumbing?

commercial plumbing

What is the Best Pipe to Use for Plumbing?

Are you wondering what the best pipe to use for plumbing is? There are many different types of pipes on the market. As a matter of fact, copper pipes are popular both for cold and hot water pipes. This is because they are heat resistant, corrosion-resistant, and possess natural anti-microbial properties. However, all of these excellent traits come with a price. Copper pipes are more expensive than plastic pipes. It’s important to understand that there is a range of pipe options in the plumbing industry. These options range from galvanized steel to copper, polyvinyl chloride, chlorinated polyvinyl chloride, and cross-linked polyethylene.

How Do You Do Commercial Plumbing

Commercial plumbing is a very important and strenuous job. If you are wondering how commercial plumbing is accomplished, the first thing to understand is what a tremendous responsibility falls on a commercial plumber’s shoulders. While it is true that plumbing follows the same principles from property to property, for commercial applications the job is much bigger and harder. Bigger plumbing installations mean more expensive, finer tools. It also means that the plumber should have many years of experience and expertise. A plumber becomes certified through a series of tests, examinations, and apprenticeships. In order to be taken seriously as a commercial plumber, the plumber should probably be a journeyman or master plumber.

What is the Biggest Plumbing Company?

There are many big plumbing companies across the United States. One of the biggest plumbing companies in America is Roto-Rooter. The reason why this company is so large is that it is a very effective plumbing company that many people have come to rely on for its services. The ease of availability coupled with reliable services makes Roto-Rooter an excellent plumbing competitor.

What is the Difference Between Commercial and Residential Plumbing?

Are you wondering what the difference is between commercial and residential plumbing? Please review the following bullet-pointed list to discover more.

  • Commercial plumbing receives greater use. This means that the plumbing system in a commercial property must be built to withstand strenuous use. More pipes and outlets will be required as well. 
  • Complexity. For residential homes, the plumbing system is fairly simple and straightforward when compared to commercial properties. For example, there can be multiple floors, a lot of toilets and several kitchens or laundry rooms. There will need to be enough hot water for all the appliances and a good sewage system designed to funnel waste away properly.
  • Cost and expense. The whole plumbing system of a commercial property will be valued higher than the plumbing system of a home. Consequently, if there is a large plumbing problem in a commercial property, then it has the potential to be quite disastrous.

What Brand Faucets Do Plumbers Recommend?

There are a variety of different faucet brands available on the market. But which one is the best? According to a leading plumbing website, there are a number of different faucet brands that plumbers trust. The Moen Arbor Touchless Faucet has received excellent reviews. The best dual handle faucet is apparently the Delta Faucet Windemere 2-Handle. The best budget model is the WEWE Single Handle High Arc. If you are thinking about a new faucet installation, it is important for you to do appropriate research. For example, what kind of finish do you want? What material do you want the faucet to be made out of? What budget do you have? All of these are important considerations.

Is Commercial Plumbing Hard

If you are wondering whether commercial plumbing is hard, you must first consider what it takes to be a plumber. Expertise, certifications, and research are what distinguish plumbers from handymen. In addition, commercial plumbing is indeed harder than residential plumbing because it requires large pipes, proper planning, and high-quality materials. Commercial plumbing must be precise and have endurance, which is why it is very important to hire an experienced plumbing company with a good reputation for your commercial plumbing services.

How Commercial Plumbing Works

Commercial plumbers have the task of installing plumbing elements like kitchen fixtures, bathroom fixtures, drinking fountains, sprinkler systems, and more. Each of these plumbing fixtures must be installed properly and with the right materials. Maintenance for these commercial plumbing systems includes fixing drain leaks and repairing pipes and water and sewer lines.

What is Commercial Plumbing

Commercial plumbing systems are equipped to bring water into the facility and funnel waste away from the facility. 

commercial plumbing

What to Know About Commercial Plumbing

If there is a problem with your commercial plumbing, it is best to act sooner rather than later. Bad plumbing problems have a nasty habit of only getting worse before they get better. Please be sure to consult with a reputable plumbing company for all of your commercial plumbing services.

If you need help with your commercial plumbing in Marietta, GA, you need plumbers that you can rely on. Please give our team a call at 404-475-3009.

How Do You Check For Plumbing Inspection?

Technician servicing the gas boiler for hot water and heating

Learn More About a Plumbing Inspection

Your plumbing system will run into problems along the line which will arise the need for a plumbing inspection in order to pinpoint problems areas. Even if problems aren’t immediate your property will still require a plumbing inspection to be conducted every so often in order to make sure that all systems are in good condition. With a plumbing inspection, you’ll be able to catch problem areas in their beginning stages before they affect other areas and worsen. It’s important to get in touch with certified plumbers when you’re looking into a plumbing inspection so that you may have recommendations that best match with your particular property specifications. In order to learn a bit more about a plumbing inspection and what it entails, here is some general background information that may be of use to you.

What happens during a plumbing inspection?

A plumbing inspection is designed to encompass the entirety of your property’s plumbing system in order to see the complete picture of its health, immediate needs, and future projects. The entire plumbing system will involve your sinks, faucets, washer, pipes, toilets, shower, bath, water lines, sewer lines, and other appliances such as water heaters or boilers. Proper water pressure will be tested and your water heater and toilets typically will have special attention placed upon them. 

What is a rough plumbing inspection?

A rough plumbing inspection is considered to involve a property where only water supply and drain pipes are running while sinks, faucets, and other fixtures are not installed as of yet.

How long does a plumbing inspection take?

A plumbing inspection will take two hours to complete on average but the amount of time will largely depend on the size of your property and the number of problems discovered. 

How often should you check your plumbing?

A plumbing inspection should be conducted by a professional at least once every two years while some recommend every year. 

How do I know if my plumbing is bad?

A plumbing inspection will be the best indicator to professionally measure if there is something wrong with your plumbing. There are some signs, however, where you may be able to tell that repairs need to be made. If you constantly are getting low water pressure around the house this could point to problems with your pipes. If you see stains on your walls then there could be that there is a leak present in the pipes behind them. With unpleasant smells coming from the drain, there could be pipe corrosion, water tank sediment, or leaks with your sewer line. What’s more, discolored water will point towards corrosion, rust or sediment buildup. Lastly, hearing odd sounds with your pipe can indicate high water pressures, loosened pipe connections, a bad water heater, leaks, and other possibilities.

Leakage Of Water From Stainless Steel Pipe On Gray Background

What are the most common plumbing problems?

  • Dripping faucets.
  • Slow draining sink.
  • Clogged bath or shower drain.
  • Clogged toilet.
  • Running toilet.
  • Faulty water heater.
  • Low water pressure.
  • Jammed garbage disposal.
  • Leaky pipes.
  • Sewer system backup.

Can bad plumbing make you sick?

Bad plumbing does have the ability to make you sick as you could be exposed to Salmonella, Hepatitis, or E.Coli from everyday tasks such as washing your hands to showering. It’s important to have a water quality test conducted for your property in case the issue is the quality of the water you get from your city. With this, you may be able to implement a whole house water purification system for a healthier water output. If it isn’t that, a plumbing inspection should be conducted to see if piping materials or your water heater are worn, rusting, or causing unnatural build up.

How much does it cost to run a camera down a sewer line?

A video camera plumbing inspection will incorporate the use of state of the art equipment that can track and locate problem areas and will tend to be more expensive than a regular plumbing inspection. Depending on the circumstances, prices can range from a few hundred to a couple of hundred dollars. Professional plumbers will typically charge a flat rate for this service yet it depends on the company that you go with for this type of plumbing inspection service.

How do you check for water leaks in your pipes?

If you don’t have a water leak detection tool as used by professionals you may be able to conduct an amateur plumbing inspection of your property to see if there is a leak. First, make sure that there isn’t any water being used in the house. Then, locate you water meter and check to see if the leak indicator is moving. If you don’t have a leak indicator turn off your water and allow water to drain out of the house. If you hear the sound of water moving in the pipes or notice your water meter is still active then you may have a leak. 

What is considered a plumbing emergency?

A plumbing emergency will consist of situations where the structure of the property is put at risk or the production or use of water is prevented. Such events like with flooding, sewer backups, burst pipes, and lack of any water can be considered to be emergency plumbing situations. A plumbing inspection should be conducted with your emergency plumbing situation as it can localize problem areas, find other problems that are adding to the issue, and back up any insurance claims that need to be made.

Get Help From a Professional Today

If you’re in need of a plumbing inspection for your property count on the services of your local plumber. A qualified plumber will be able to make sure all areas of your home are well maintained and let you know of any cases that need to be addressed. Ensure a properly working plumbing system by scheduling an appointment with your qualified, local plumbing company today.

If you’re interested in a plumbing inspection in Marietta, GA call 404-475-3009 with Plumbers 4 Real!

Why Did My Garbage Disposal Stop Working?

garbage disposal repair

Why Did My Garbage Disposal Stop Working?

Are you in need of garbage disposal repair? The fact of the matter is that there could be many reasons why your garbage disposal isn’t working. First and foremost, it is important to understand what foods and liquids not to put down your garbage disposal, so that you can avoid having to get garbage disposal repair in the first place. Please review the following list to discover more about what not to put down your garbage disposal.

  • Grease and oil. Grease and oil are very bad for your disposal. This is because clogs develop as a result of grease and oil mingling with food scraps and hair follicles. It is always best to pour oil and grease into a separate receptacle or container which can then be put in the trash.
  • Coffee grounds. Coffee grounds have a bad habit of creating clogs too. Over time, coffee grounds can get stuck inside the trap of your disposal.
  • Pits and seeds. Anything as hard as a pit or seed will have a negative impact on the blades and inner workings of your garbage disposal.
  • Celery. Celery is fibrous and the fibers can become entangled in your garbage disposal and grease trap.
  • Rice and pasta. When rice and pasta harden, they can cause a lot of trouble for your garbage disposal.
  • Egg shells. Egg shells can be composted or thrown away, but they should not be put down the sink.
  • Animals bones. Animal bones are extremely rigid and will damage the blades of your garbage disposal over time.

Can a Garbage Disposal Be Fixed?

Are you wondering whether or not your garbage disposal can be fixed? A simple call to a local, reliable, and certified plumber will be the best course of action. In order to find a reputable plumber in your area, ask your friends or neighbors for a referral. It’s always best to consult a plumber with many years of experience versus a handyman without credentials or references.

Do I Need A Plumber to Replace a Garbage Disposal?

If you are requiring a garbage disposal removal and replacement, it is always a good choice to select licensed and insured plumbing professionals. That is because in order to become a plumber, an individual must go through many years of training and experience. They must pass tests in order to become certified. If anything goes wrong with your garbage disposal removal and replacement, a certified plumber will have access to insurance and be able to make the necessary repairs.

Can a Plumber Fix a Garbage Disposal?

The simple and best answer to whether or not a plumber can fix a garbage disposal is, of course, yes. Plumbers are licensed and trained to handle all manner of plumbing fixtures. The more years of experience a plumber has, the better. A master plumber, for instance, will have more experience than a journeyman plumber.

Can You Still Use the Sink if the Garbage Disposal is Broken?

It is important for homeowners to understand the nature of the connections between the garbage disposal to the sink and the dishwasher. The dishwasher discharge of wastewater is usually connected through the garbage disposal. This is because the garbage disposal occupies one of the drains of the dual sink. The dishwasher drains and discharge will not be impacted by a  broken garbage disposal. 

Garbage Disposal Not Jammed But Humming

Is your garbage disposal humming? If so, it is a signal that there is power flowing through the unit, but the blades are not turning. As a matter of fact, the humming sound could be a sign that the motor is clogged or jammed, which has resulted in the failure of the machine to grind properly. A reputable plumber will be able to get to the bottom of the issue.

Garbage Disposal Repair Services Near Me

The best way to find a garbage disposal repair service is to type in those words into a search engine. Smart technology will be able to pinpoint your location and the nearest plumber to your location.

Garbage Disposal Jammed With Glass

If your garbage disposal is jammed with glass, you are not alone. Many homeowners experience this event in their lifetime. Apparently, it is possible to use a hex key on the bottom of the disposal to help dislodge any glass that is blocking the blades.

garbage disposal repair

Garbage Disposal Jammed with Potato Skins

If your garbage disposal is jammed with potato skins, there is a natural remedy available. You can use salt and baking soda to remove the offending clog. You can pour half a cup of salt and half a cup of baking soda down the drain. Follow this with six cups of boiling water. Let sit overnight and then flush with water. The hot water will be able to break up the clog and the baking soda and salt will act as an abrasive.

Our company can help you with your plumbing repair. Our staff at Plumbers 4 Real are ready to take your phone call at 404-475-3009. Discover more about how we can enable your garbage disposal repair in Marietta, GA!

Why is my water bill so high?

water guage

How do Plumbers Detect Leaks?

For the average homeowner, water bills tend to remain pretty steady in terms of the monthly cost they warrant. So when there’s a sharp rise in charges, the often correct assumption is there is a problem occurring in your system. When you get a high water bill, the indication is a sharp rise in cost that can be hundreds of dollars that unfortunately can be hard to deal with. Determining the source of the cost can be it’s own unique headache as well by being either something extremely noticeable or entirely hidden from you. The methods we use to find leaks can be:

  • Critically look over usage
  • First checking the water meter
  • Examine walls and ceiling for wet spots
  • Use food coloring on toilets and sinks

When a leak is obvious or the toilet is suspected of leaking, food coloring can easily help you find which item is the cause. Using it in the toilet tank for example and later finding it in the bowl will indicate that the leak is your toilet. That said, plumbers have quite a few specialized tools that can help them find the exact location where your home or apartment is experiencing a leak. Tools that use sound or vibration that simply are either expensive or rarely found in the home. For leak repair and plumbing services in Marietta, GA, you can trust Plumbers 4 Real to get the job done. Call 404-475-3009 today to set up an appointment and get your water bill back at the right price.

How do I Calculate my Water Bill?

It doesn’t take being a highly experienced homeowner to know that you have a problem when seeing a high water bill. However, those that own property should understand how to calculate their own water bill in the case of needing to discover if you’re ever being charged too much or to maybe catch a leak early on. The calculation to remember for this is minimum bill + volume charge = Total. How to find the minimum charge can be easily discovered by asking your water company or figuring out your ccf. Your volume charge is actually listed on your regular water bill. The average water bill differs from person to person, so it goes without saying a person living in a two person apartment will obviously drastically be different to that of a four person family living in a home. That said, a normal American does use around eighty to one hundred gallons of water per day.

Can a Leaking Water Heater Cause a High Water Bill?

Companies like Plumbers 4 Real offer services such as emergency plumbing so you don’t have to wait when it’s a plumbing emergency. Whether it be from appliances or pipes, leaks can sharply increase the amount of money you pay and leave you with a high water bill. When it comes to leaks occurring in your water heater, the signs are generally easier to detect than the pipes that are in your wall or underground. A person suspecting a leak in their water heater can generally see one of the following:

  • Pooling water in or around the water heater
  • Mildew and mold appearing on or in proximity to the water heater
  • A mass amount of condensation on or around the water heater

Toilets also make a huge portion of a person’s water usage, making up a chunk of the water bill for the average apartment or household. When a toilet continuously runs, that can mean a heavy amount of water going through and you footing the bill without knowing its happening. One of the telltale signs a toilet is continuously running is with a hissing noise is coming from the toilet. Another is the constant running is when the current in the bowl is running and not overflowing. 

Another easy to find water leak is dripping or leaking faucets. These are easier to find due to the leak being visible or the piping below showing clear signs of leakage. A leaking faucet can waste around seventeen gallons per day when left alone. When you suspect the leak may be coming from a faucet, yet it is not leaking, look at the pipe. You can see the leak in the pipe below through obvious leaking, moisture, or rot.

drain repair

Are Water Meters Free?

Depending on your water company, a water meter is either free or at a set price. A water meter is used to measure the amount of water usage per person. By contrast, a water flow sensor detects the rate of flow and indicates when a certain amount goes through. While when a water bill is high it may be nice to think that a water meter is wrong, the devices are highly accurate. Getting a high water bill for that reason was more than likely recorded through the water meter. When they break, water meters very rarely cause the water to be high. Most water companies will say that it is impossible for a water meter to add anything to your water bill that is naturally occurring. 

When you find yourself needing plumbing services or have questions about water meters in Marietta, GA, trust Plumbers 4 Real. Call 404-475-3009 today to schedule an appointment.


Can you repair a hot water heater?

water heater in a garage

Get comfortable water when you want

What is the water heating? It is a way for heat to transfer by using an energy source that heats water higher than its original temperature. The typical uses for hot water are for bathing, cleaning, cooking, and in some parts, space heating. We’re so accustomed to having hot water when we want it, when the water heater dies, we seek water heater repair promptly.

When did this appliance come into our lives that have become crucial in our daily lives? It took over a century, starting back in 1868, and many contributors to get us to where we have water heaters in every household. The first residential use water heater named “Geyser” after a gushing hot spring in Iceland and was heated by natural gas.

Unfortunately, there wasn’t any form of ventilation of the gas vapors, such as the flue we have today, so it wasn’t safe for home use.  An engineer would contribute next by designing a storage tank and other safety features, making it an automatic gas run unit. Many more additions and design changes would come during the 1990s, making it one of the best inventions for homes today.

Today, when a water heater is not working, we go into a panic state of mind. Or if our water heater is leaking, we grow concerned if it can be repaired, or will we need to buy a new one.  For a new homeowner, or has never experienced a water heater failure, there are many questions to be answered.

What would cause a hot water heater to stop working?

There isn’t much worse than being the last one to get in the shower only to have ice cold water hit you. There can be a wide range of things that cause an electric water heater to quit. Here are troubleshooting steps you can use to determine what could be wrong, before calling for a water heater repair service. Start by turning off the power at the circuit breaker that is connected to the heater unit.

  • Check the Pilot Light:  This is a common problem and is easy to fix without calling a professional water heater repair service. Following the directions in the owner’s manual, follow the instructions on how to re-light it.
  • Gas Leak: A gas hot water heater could have a leak in the gas line, which you should be able to detect by an odor like, a rotten egg smell. Just as with a roof repair, this is one of those times that a professional water heater repair is a must, gas is dangerous and only an experienced and qualified person should repair or replace a gas line.
  • The Heating Element: If the water doesn’t get hot enough or you don’t get enough for that awesome morning shower, the heating element needs replacing. For a handy homeowner, you can do this yourself by following instruction videos on the internet. Or schedule a professional water heater repair service call.
  • The Thermostat: If you’re getting a little hot water, it can sometimes be the thermostat that needs to be adjusted up. Or if the water gets too hot, adjust it down. If that doesn’t fix it, the thermostat needs to be replaced.  Again, this is something a handy homeowner can do with instructions on the internet or schedule a water heater repair appointment with a professional service.
  • Sediment Buildup In Tank: Even in North America, the water has contaminants that build up in a water heater tank and hardens at the bottom. This reduces the amount of water the tank holds and heats. This sediment buildup can be minimized by a regular schedule of water heater cleaning.

Other ways to help lessen this buildup is to add a water softening agent and lower the temperature to 130. When the tank has become rusty over time, that buildup cannot be removed. This requires more than just water heater repair. This means you need to purchase and arrange a new water heater and installation.

How many years does a water heater last?

Every appliance or device you buy for your home will need repairing or replacing at some point. With water heaters, the general rule and guideline are eight to twelve years for a water heater with a tank. With a regular schedule of maintenance, you can extend that average lifespan.

However, if your water heater has recently reached a 10-year anniversary, you should be watching it closely for any of the problems we’ve described above. As you shop for a new water heater, consider these the following two considerations so you choose the best one for your home and family:

  • Do you want to buy a tank or tankless water heater? What will it take to switch from a tank-style to a tankless water heater system?  There is electrical, water, and gas line if applicable that require retrofitting or replaced to go with a tankless style.
  • Do you need a larger tank capacity with your new water heater? Did the old one supply enough hot water when it was at its prime working condition? Or did you have to time bathing and laundering around the water heating?

What are the signs your hot water heater is going out?

If you are like most homeowners, you spend little time thinking about your water heater, much less think about if it is about to quit working. If you’re observant though, there are a few signs that will give you the hint you may shop for a new water heater, or at the very least, scheduling a water heater repair appointment.

  • Age – If you’re about to celebrate your water heater’s 10th birthday, prepare the budget for a replacement soon.
  • Water Puddles – If you notice puddles of water around the water heater or notice water coming from the bottom, it’s self-explanatory – your water heater is leaking. However, before you have that old one yanked out and replaced, check the water lines running to it and the connections at the water heater, meaning a basic water heater repair call could be all you need.
  • Noisey – Does your water sound like it is full of angry hobgoblins knocking on the walls of the tank? This is caused by sediment built up in the tank and has it hardened, and the water heater must work harder to heat water. Cleaning the tank can help, sometimes though, it’s too far gone with rust in that buildup and a water heater replacement is needed.
  • Water rusted – If the water your bath or kitchen is coming on rusted looking, this is a good sign that your water heater tank has rusted inside, or the water pipes going to and from the water heater have rusted. A professional water heater repair service all can determine which it is and if it isn’t the tank, replacing the pipes will usually take care of that rusty water.
  • Not Getting Hot or Staying Hot – Are your showers getting shorter because the water gets cold faster? This could be the water heater can’t keep up with the demands anymore and you need to replace it.  Or it could the thermostat need to be adjusted. Try the thermostat first and if that doesn’t help, you can have a water heater repair service come to check the unit, but chances are, you need a new one.

How do I reset my water heater?

If your water heater isn’t producing hot water, sometimes a quick reset will fix it. Use the following steps and see if this saves you a water heater repair service call:

  1. Disconnect the electricity to the heater.
  2. Remove the cover plates.
  3. Remove the insulation pad. 
  4. Locate the red reset button and press the button firmly.
  5. Wait to hear the button click.  

After you hear the click, return the panel cover and plug the water heater back in.  If you’re still not getting hot water, or you don’t hear it heating water, make that phone call.

close up on a water heater

How long does it take to flush a water heater?

Not long at all and definitely worth doing to extend the life of your water heater. It is the size of the tank and the water pressure your home has will dictate how long it takes to drain the unit. The average fifty-gallon tank and the good steady water pressure will usually take five minutes. 

The water heater isn’t an appliance that we “work” with every day like the refrigerator, stove, microwave, etc. However, it works for us every day and depending on a household size the activity within that household, it can work hard.  Taking the time to perform maintenance like draining the tank at least once a year can extend the lifespan and will make your water get hot faster and longer. For your water heater service needs in Marietta, GA, call 404-475-3009 today!

How Do You Fix a Leaking Pipe?

A Leaking Pipe.

How do you fix a leaking pipe?

Having a plumbing pipe leak can be a major problem that can become very costly if not taken care of quickly. Depending on where the leak is located, pipe leak repair can be fairly simple or it can be really complicated. In some cases, if the leak is located in pipes that are readily accessible, it’s possible to make the repair on your own. One question you may have in mind before you undertake a repair is “Will plumbers putty fix a leak?” You can find the answer below, along with some other repair tips. Before you get started on the repair, you’ll want to turn off the water, drain the faucet where the leak is located, and dry the broken pipe.

Here are some ways to fix a leaking pipe.

  • Use plumber’s putty or epoxy putty to make the repair: As a temporary fix, you can make the repair with epoxy putty, aka plumber’s putty, by shaping a piece of the putty by hand and wrapping it around the hole in the pipe and tapering the edges to make a tight seal. The putty should be about ½-inch thick. Allow the putty to set about 5 to 10 minutes before turning on the water. 
  • Clamp the pipe at the break: A pipe clamp and rubber gasket can be used to temporarily seal the leak. A pipe clamp should be the same size as the leak. The rubber gasket is aligned along the length of the leak, and the clamp is fitter over the gasket and tightened until the clamp stays in place.
  • Put a slip coupling on the pipe: Get a slip coupling from a hardware store that is the same material as your pipe. Use a pipe cutter or hacksaw to cut away the section of pipe where the leak is located. Use a deburring tool to scrape clean the inside and outside of the pipe before inserting the coupling onto the pipe ends.

In many cases, these repairs are temporary fixes. If your leak is more serious or want permanent pipe leak repair in Marietta, GA, make sure to get in touch with the professionals at Plumbers 4 Real. We can be reached at 404-475-3009.

Emergency pipe leak repair kit

You never know when you might have a pipe leak, and it may be necessary to make an emergency pipe leak repair for a temporary fix until you can get a professional out to make a permanent repair. Having materials on hand to make the repair is always useful. You can prepare an emergency repair kit with the tools and material listed below.

  • Scissors
  • Slip Joint Pliers
  • Nut drivers
  • A screwdriver set
  • Files
  • Tape measure
  • A pipe cutter or hacksaw
  • Plumber’s epoxy or putty
  • Repair clamps
  • Plumber’s tape

How do you fix a leaky epoxy pipe?

Pipe leak repair can be complicated, especially when you need main pipe lines repaired because these pipes are buried underground. Underground pipes normally require plumbers to either dig them up and replace the damaged pipe or reline the damaged pipe using an epoxy coated line that’s inserted into the old pipe. This method is especially effective at repairing pinhole leaks. 

While this repair method is effective, it can sometimes happen that the epoxy pipe can leak. If this happens, you’ll need a professional like those at Plumbers 4 Real to repair the pipe. Often this repair requires a “press-fit” connection. Sometimes, the pipes may need to be replaced.

Can I use Flex Seal on a leaky pipe?

Flex Seal is a liquid sealing product used to seal a variety of leaks and other damage on different surfaces. It’s either brushed, rolled, poured, or sprayed on. There is also a Flex Seal tape product available. The product gets mixed reviews when it comes to sealing leaks, and is at best a temporary fix, similar to using plumber’s putty. One of the problems seems to be the amount of time it takes for the product to dry. Some report it takes anywhere between two to 24 hours to dry. It is affected by temperature, humidity, and the coating’s thickness. 

How do you seal a leaking pipe joint?

As with pipe leak repair on a straight length of pipe, if you have a leak at a pipe joint, the difficulty of the repair will depend on the severity of the leak and the type of pipe involved. In some cases, all you need to do is tighten the joint to stop the leak. Copper pipes may need to be soldered into the place. In some cases, the repair on a joint can be made with either plumber’s tape or plumber’s epoxy or even clamps. Again, many of these fixes are temporary, and a professional should be called out for a permanent repair.

Repair pipe leak in wall

While pipe leaks on visible pipes might be fairly easy to repair, if you have a pipe leak behind a wall, you may have a complicated issue at hand that’s best left to a professional. Of course, because the pipe is hidden behind a wall, finding the leak’s location will be difficult, and may require special equipment like a thermal camera or video camera. Once the leak has been found, a portion of the wall will have to be removed. While you may be able to make a temporary repair with putty or a clamp, you’ll want to make a permanent repair sooner than later so you can also make repairs on the wall.

Sometimes you may have water leaking from your ceiling. This could be a plumbing leak but it could also mean you have a roof leak. Find out if you have a roof leak with a roof inspection in Alpharetta, GA, or surrounding areas.

Pipe leak repair cost

Costs for a pipe leak repair will vary. Much of the cost will depend on where the pipe is located. If it’s a visible pipe underneath the sink, for instance, repairing the leak can cost between $175 to $450, whereas a main line leak can run anywhere between $300 to $4,000. A leak under home’s foundation, known as a slab leak, can cost anywhere $500 to $4,000. Because many pipes are located behind walls or under floors, the leak will need to be located, and leak detection can cost anywhere between $125 to $400.

A Plumber Repairs a Pipe.

Pipe leak repair near me

If you have a pipe leak and need pipe leak repair in Marietta, GA, count on the professionals at Plumbers 4 Real. We provide a full range of plumbing services. Schedule services with us by calling 404-475-3009.